LuxHeat Cable Kit 240v (40-300sqft) Electric Radiant Floor Heating System Tile +
ENJOY THE BEAUTY AND PRACTICALITY OF A HARD FLOOR, WITHOUT COMPROMISING ON COMFORT. LuxHeat's wide range of 120v and 240v loose-lay cables offers the ultimate in design flexibility, allowing for custom configurations and easy installations.
Residential, Office apartments and Senior living facilities. Installs under tile, stone, marble, laminate and engineered wood floors. Primary or secondary heat source, it doesn't have to be below Zero to enjoy a warm floor. Double insulated, single cold lead. UL listed for USA, classified as safe for wet Locations.
Ultra low EMF - Dual conductor Tech, Alu foil sheath and ground wire. Heater wire is less than 1/8 thick, ensures minimal effect on finished floor height. ETFE insulated and covered by tough outer jacket, providing protection against abrasion and corrosion. Dual sensing (Air & Floor).Modern, Sleek design to compliment any room in your home. Keeping it simple with OJ's Non-Programmable thermostat, no programming complications. Alarm Includes: 2 x AAA.
Recommended by health professionals for allergy sufferers. Safe for children, elderly and pets - No hot, exposed or moving parts. Accurate and intelligent control ensures your personal comfort and affordability. Completely out of sight, no unattractive plug-in heaters, no storage hassles, no maintenance and no smell.
Prolux Materials LLC is a family owned, American business, focused on delivering quality products throughout the USA. With production and distribution facilities in both Kentucky and Tennessee, we find ourselves well positioned to meet all logistical demands.
Our Flagship Floor Heating brand, LuxHeat, coupled with OJ Microline&#####x2019;s range of intuitive, energy efficient thermostats, offers the ultimate in Luxury and Comfort, Reliability and Affordability. Suitable for Most Floor Coverings. Includes porcelain, ceramic, marble and more. Safe for wet areas, including showers. Elements MUST be Embedded in Thinset, leveling or self-leveling compound.
We recommend Installing a Floor sensor to limit floor temperature and protect flooring. Elements Must be Embedded in Thinset, leveling or self-leveling compound. Includes Engineered and Solid wood.
If it wasn&#####x2019;t for the cozy warm feeling in the room, you would never know it had been fitted. Unlike conventional heaters that warm one particular spot, LuxHeat radiant floor heating evenly distributes warmth throughout the floor and up into the room, leaving no uncomfortable cold spots. The heat is directed where it is most pleasing &#####x2013; the feet &#####x2013; leaving the air we breathe slightly cooler. In fact, the air surrounding our bodies remains slightly cooler than our bodies, preventing that &#####x2018;&#####x2019;stuffy&#####x2019;&#####x2019; feeling so often experienced in a room that is heated by forced air. 3&#####x201D; pre-spaced wiring is designed to reduce installation time and ensure even heat distribution.
Dual wire technology with aluminium shield minimizes electromagnetic fields (EMF). The Mesh can be cut and flipped or rotated to provide maximum coverage; wires can also be removed from the mesh to help get into those hard-to-reach areas. The Self-Adhesive mesh on one side and double sided tape on the other, ensures the mat adheres to sub-floor and lies flat even when flipped or rotated.
Radiant heat does not dry out the air, circulate dust or aggravate allergies. Out of sight, no unattractive plug-in heaters, radiators or vents; no storage hassles and no fan noise.No hot, exposed or moving parts and no maintenance. Optimal Comfort, Easy Control and Contemporary design. The modern thermostat provides so much more than simple temperature control - it is a personalized and intuitive device designed to give a greater degree of control and comfort in the hands of the user.
The OJ Microline UTN4-4999 Non-Programmable Thermostat with built-in GFCI is the ideal controller for those looking to keep it simple. No Programming or set up time required, simply select desired temperature and enjoy the warmth. Designed and manufactured by OJ Electronics &#####x2013; Denmark. Keeping it simple, Easy-to-install, no set up required.
Dual sensors (Air and Floor) with floor limiting feature. Built-in Class A GFCI (Ground Fault Circuit Interrupter). Back-lit display for easy reading. Child lock - prevents tampering.Mesh Cutting Techniques &#####x2013; Cut & Rotate. There are several ways the heating mat may be cut and turned to fit around corners and avoid obstacles such as fixtures and built-ins on the floor. Heating wires must never touch or cross. Heating wire cannot be cut or shortened. Heating wires must never be closer than 2 &#######xBD; inches apart.
The mesh between the wires may be cut but take great care not to cut or nick the wire itself. Wire may also be removed from the mesh and laid out on the floor. Secure in position with pieces of 1&#####x201D; wide duct tape, or hotmelt glue. LuxHeat's Radiant Floor Heating Mat is one of the most robust, versatile, easy to install floor heating systems available on the market today. The resin coated fibreglass re-enforcing mesh is designed to protect the heating cable and add strength to the layer of thinset or mortar.
The re-enforcing mesh can be cut, turned, flipped, or in part removed, to accommodate any room size or shape. While the MESH can be cut, the heater wire MUST NOT be cut or shortened. Elements are ETFE insulated and covered by a tough outer jacket, providing the ultimate dialectic and mechanical strength. Heater wire is less than 5/32 thick, ensuring minimal effect to finished floor height. Heater wires are pre-spaced at 3&#####x201D; intervals &#####x2013; providing optimal heat distribution. Mats are 20&#####x201D; wide, and available in various lengths. The UTN4 Thermostat can be configured for control of Floor Temperature, Room Temperature, or Room Temperature with Floor Temperature Limiting - providing optimal comfort levels while ensuring floor coverings do not exceed recommended temperatures. The UTN4 offers all the necessary functions to ensure easy installation and temperature control, for every floor type. Ambient Temp Range +32 to +104&#######xB0;F (0 to +40&#######xB0;C). Floor limit range: +41 to +104&#######xB0;F (+5 to +40&#######xB0;C).Dimensions: H 4.8&#####x201D; x W 3&#####x201D; x D 1&#####x201D. The LuxHeat Monitor is designed to measure the heating cable&#####x2019;s continuity during installation. If the heating cable is cut or damaged during installation the Monitor will immediately alert the installer by means of a loud alarm and red flashing light.
We still recommend an ohms test is carried out before, during and after installation. If the alarm sounds we suggest contacting a professional to identify the damaged area and make the repair.Early warning system, avoiding costly repairs in the future. Connects directly to the heater - Live, Neutral and Earth. Includes loud alarm and flashing light. Works with all floor heating systems.
The Floor Sensor is a reliable and accurate temperature sensing probe designed to measure floor temperatures when connected to a thermostat. OJ Thermostats&#####x2019; default setting is Dual Sensing (Air/Floor), meaning the floor sensor will need to be installed and connected. The thermostat can be set to measure AIR only, but for optimal control and comfort we recommend installing the floor sensor and using the thermostats default &#####x2018;Dual Sensor&#####x2019; setting. Installs directly between heating wires for accurate temperature readings. Used in conjunction with Thermostat to limit floor temperature. Resistance: 8 to 12 K OHM measures 68&######x2DA;F to 86&######x2DA;F (20&######x2DA;C to 30&######x2DA;C). Neutral polarity making for simple connections. 15ft length allows for optimal placement. Sensor type: NTC 10 K OHM. Listing and template services provided by inkFrog.