500W 24V DC MOTOR XYD-6B Currie Technologies For 500 Series Schwinn & IZIP electric scooters (chain drive) Brand new with. Motor for electric scooter can be used for mini bike quad and Go-Kart.
It may also work for bicycle. Or do it yourself enthusiasts.
24 Volt 500 Watt motor from Currie Technologies. OEM motor on 500 Series Schwinn & IZIP electric scooters (chain drive). Standard three hole mounting face plate used by most high powered Currie Technologies scooters. Center to center mounting hole distances approximately 3-7/8.This motor is capable of rotation in either the clockwise or counterclockwise direction by reversing the motor's power wires. Currie Technologies part number: SD-156 Motor Specs: Model: XYD-6B Motor Type: Brush Voltage: 24 Volt DC Rated Speed: 2600 Rpm Rated Current: 28 Amp Sprocket: #25 Chain 11 Tooth Output: 500 Watts Rotation: Reversible Sprocket: Removable Set-Screw Sprocket Dimensions: Case Length: 3-7/8" (98 mm) Case Diameter: 3-15/16" (100 mm) Drive Shaft Length: 1/2" (13 mm) Drive Shaft Diameter: 3/8" (10 mm) Mounting Hole Distance: 3-15/16 (100 mm) Compatibility: eZip E-500 GT-500 IZIP I-500 Mongoose M500 Schwinn S500 This motor should work with Schwin and IZIP 500 series electric scooters. Or any other scooter, mini bike or go-kart using 450W or 500W motors that looks similar to this one. Should also work with any other brand with similar specs in motor.... Please check connector type and motor size and specs.
Please ask us if you need to know any specific dimensions for this motor so you can be sure it will work for you.