A Cadet electric baseboard heater with a T522W wall thermostat included is a simple and economical way to add quiet, convection heat wherever it's needed in your home. This white 96-inch heater is an industry-standard size making it ideal for replacement or new construction, and is designed for easy installation with pre-punched mounting marks and wiring at both ends. Be sure to choose the correct heater size for your room.On the chart below, find the area size you want to heat and then select the corresponding wattage. Not a plug-in model, this electric baseboard heater and wall thermostat combination require a hard-wire installation which is a permanent, safe and reliable heating solution. Requires 240-Volt or 208-Volt wiring (double breaker). Choose the correct heater size for your space. Simply match your area to the corresponding wattage (see chart below). Large 2,000-Watt heater effectively warms up to 250 sq. 2,000-Watt output with 240-Volt wiring (8.3 Amps, 6,825 BTUs) or 1,500-Watt output with 208-Volt wiring (7.2 Amps, 5,120 BTUs). Place baseboard directly on the floor, mount to wall and maintain 12 in. Clearance from furniture, drapes, etc. Do not install below electrical outlets. Double pole (4-wire) mechanical thermostat controls up to 5280-Watt at 240-Volt or 2640-Watt at 120-Volt. Thermostat setpoint range: 40°F to 80°F (5°C to 27°C), comfort range: 3° to 6°. Thermostat controls up to 5280-Watt at 240-Volt or 2640-Watt at 120-Volt. A high-temperature safety device switches heater off if normal operating temperatures are exceeded. UL listed in the US for safety compliance.
Thermostat comfort range: 3° to 6°.