240V Radiant Floor Heat System Electric Mat Tile Warm Heated All Sizes withThermo
Electric Floor Heating Mat with Programmable Touch Screen Thermostat. Mat is 20 Wide by Various Lengths. Mat is designed to cut-and-turned (do not cut red heating cable) to fit any shaped area. EVERYTHING YOU NEED IS INCLUDED. The 20" Wide Electric Floor Heating Mat consists of a mat with the cable heating elements pre-spaced 3" within the mat.
Simply unroll the floor heating mat with the cold lead running up the wall to the electrical box. These heating systems are ideal for rectangular or square areas with right angles. You can manipulate the mat to fit the desired heating area by using the turning techniques shown below. The white fiberglass mesh may be cut to flip and turn the mat. The RED HEATING ELEMENT CAN NOT BE CUT, so be sure to accurately measure the space you are heating.
This heating mat has double sided tape to offer an adhesive backing that make installation a breeze. Simply fit the mat to your floor, then peel of the tape and adhere to the floor. This greatly reduces the installation time and gets you on your way to enjoying your heated floors.TOUCH SCREEN PROGRAMMABLE THERMOSTAT with SENSOR. OJ MICROLINE Model # UDG4-4999. This programmable Touch Screen floor sensing thermostat includes the floor sensor, is designed to work with 120V or 240V electric floor heating systems, and has built-in GFCI protection. This state of the art touchscreen thermostat is extremely user friendly with sleek design and intuitive control designed for easy installation. The 3.5 smart control color touchscreen is easy to navigate making programming this thermostat simple to do.
The floor sensor is included with the thermostat and runs down the wall and into the heated area to give an accurate floor temperature reading. The sensor probe is installed in between the heating elements. The thermostat also has a built in "Ambient" temperature sensor that allows for dual temperature control.
The Installation Monitor measures continuity of the heating system during installation and will alarm if the heating system gets damaged. It will give you peace of mind while installing the floor warming system. Connect the system leads to the monitor prior to installation. The monitor will "scream" a warning in the event the heating element is cut or damaged allowing you to make any necessary repairs before the heating system is embedded in mortar.
If the alarm sounds, stop work and consult the operation manual. We still recommend checking the ohms of the floor heating system with a multimeter before, during, and after installation.Red light and alarm indicates lead wires have come loose from the terminals or damage has occurred to the heating system. Video will open in a new window. Listing and template services provided by inkFrog.