Also run them on 110 Volts AC power with the. Use of a full wave rectifier. Can also be used as a generator for making Electricity (needs diode) see video below. Can also be used for powering.
Can also be used for making Electricity (needs diode). Great for wind or hydro.
Be sure you understand how to set these up for use. NOTE: For wind or hydro power we recommend only our 115 or 208 volt models. On the higher voltage models and run them.On AC wall current within their respective voltage groups For go karts, mini bikes and cycles we recommend our 12, 24 and 48 volt models that correspond to your battery bank voltage. We also sell a 90 volt DC version great for DC water pumps and hydraulic motors.
Motor length 3.5" diameter / 6" long. 7.5 over all length including shaft.12mm shaft with 1.75 pitch threads with flat slot at shaft tip. Shaft is 1.5" long (12mm/1.75 pitch thread by 3/4" long + 3/4 flat).
Two 5/16 extra large mounting holes on the front of the motor. 5/16" NCT mounting holes are 2.874" from center to center (74mm). 4500 rpm / continuous duty at 75% of peak wattage. Heavy 12 AWG wire to handle the amps. A put-up and forget design!Expect decades of dependable service life. Rain, ice and weather resistant electronics in sealed case (not for under water).
We sell replacement brushes and bearings. Works for both CW or CCW rotations.
Must be mounted in cool place with plenty of ventilation. Epoxy/Lam rotor efficiency = 94.6% (Brushed motors convert more electricity into usable horsepower). Weighs ONLY 8.5 lbs. Almost 150 Watts Per Pound!Can be used as a generator, makes power when turned (Requires 100 amp blocking diode). THIS IS NOT A 3/4" Diameter SHAFT, it is 1.5" LONG. BUILD ELECTRIC CARS / INVENT ELECTRIC BOATS / DESIGN ELECTRIC MOTORCYCLES / MINI BIKES / GO KARTS / POWERED BICYCLES and WIND TURBINEs. We want you to use these motors in your product designs to help mankind. As we slowly run out of cheap fossil fuels - Electricity is the future. HOW TO MAKE A TREAD MILL MOTOR WIND TURBINE. Wind generator homemade - YouTube. This item is in the category "Business & Industrial\Industrial Automation & Motion Controls\Electric Motors\Blower Motors". The seller is "wind_turbine_generator" and is located in this country: US.
This item can be shipped to North, South, or Latin America, Germany, United Kingdom, France, Australia.